Azerbaijan's occupational health and safety framework requires specific documentation and procedures for any work performed at height. This article summarises the key requirements relevant to scissor lift and boom lift operation.
Operator Certification
Under Azerbaijan's Labour Code and OHS regulations, operators of aerial work platforms must hold a current qualification certificate issued by the State Labour Inspectorate (Dövlət Əmək Müfəttişliyi) or an accredited training centre.
The certificate covers safe operation of the specific equipment category, emergency procedures, and pre-use inspection. Certification is renewed every 3–5 years. Employers are responsible for ensuring operators are qualified before authorising machine use.
Equipment Inspection Requirements
All aerial work platforms used commercially in Azerbaijan must undergo:
- Annual technical inspection — by an accredited inspection body
- Pre-use daily inspection — by the operator, documented in a log
- Post-incident inspection — following any accident, near-miss, or structural damage
SkyServices provides all equipment with current inspection certificates. If you rent from us, the machine arrives with valid documentation. You are responsible for the daily pre-use checks and for maintaining a site log of use and any incidents.
Employer Responsibilities
The employer (or site manager) is responsible for:
Practical Steps Before Starting Work
1. Obtain and verify the operator's current certificate
2. Check that the rented machine has a valid inspection sticker and certificate document
3. Conduct a site risk assessment covering ground conditions, overhead obstructions, and adjacent operations
4. Brief the operator on site-specific hazards
5. Establish emergency contact and rescue procedure
SkyServices can assist with documentation questions. Contact us at +994 50 553 02 43.